 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2005/1/20 Bluetooth(R) Module Product By TAIYO YUDEN No matter how far apart- several devices can be operated at the same time. The module is available worldwide, since the use of the 2.4 GHz band is license free in every country of the world. Global standard that guarantees compatibility with products of all brands. TAIYO YUDEN CO., LTD. with customer with a reliable & small-sized module of low power consumption in the best harmony of core technologies: Multi-layer technology, High frequency designing technology & Mounting technology. *EYSF2CAXX ; RF+B.B, UART, Ver.1.2*1 *EYSF2CAXX-XX ; RF+B.B, UART, Embedded SPP *EYSF2CSXX ; RF+B.B, USB, Ver.1.2*1 *EYMF2CAMM ; ANT+RF+B.B, UART, Ver.1.2*1 *EYMF2CAMM-XX ; ANT+RF+B.B, UART, Embedded SPP *EYMF2CSMM ; ANT+RF+B.B, USB, Ver.1.2*1 *EYTF3CSTT ; RF+B.B, USB, Connector Type, Ver.2.0 +EDR *EYSFCCSXX ; RF+B.B, USB, Connector Type, Ver.2.0+EDR *EYSFDCSXX ; ANT+RF+B.B, USB, Connector Type, Ver.2.0+EDR *EYSNDYAXX ; RF+B.B, UART, Use of 1chip Mask ROM, Ver.1.2 *EWSCBBQXX ; RF,CDMA I/F,5.0x4.0mm *Evaluation Kit, Evaluation Board *All modules mentioned above are Class 2 unless stated. *Ver. 1.2*1 ; Ver. 1.2 Mandatory Available (include Faster Connection, AFH) *All modules conform to RoHS (RoHS ; Restriction of the use of certain hazardous substances in electrical and electronic equipment.) New!! Up!! Up!! New!! The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. Other trademarks and trade names are those of their respective owners. Nov./2003 Ver.2.0 TAIYO YUDEN Class2 UART Full Module Features Outline *The module is a Max.4dBm( Class2 ) module. *Bluetooth(R) standard Ver. 1.2 conformity. *Internal baseband clock oscillator. *Internal 1.8V regulator *Low current consumption *Support functions SCO links,ACL links,Piconet<7>,Hold,Sniff,Park, AFH, Faster connection *Interface:EYSF2CAXX:UART&PCM(for voice CODEC) *Protocol stack:Under HCI firmware *Small outline. 15.4 x 10 x 2.0 mm Bluetooth(R) Module EYSF2CAXX Unit: mm 2.2 1x11 2.2 15.4 Applications *Notebook PC *PDA *Cellular Phone 2.0 Parameter Carrier Frequency Operating Voltage (VDD_MEM) Operating Voltage (VDD_PIO) RF Output Power RX Sensitivity Load Impedance Input Low Voltage Input High Voltage PR EL IM IN AR Y General Electrical Specification Description measured in 50 ohm No abnormal Oscillation RESET, UART, GPIO, PCM RESET, UART, GPIO, PCM Output Low Voltage Output High Voltage Average Current Consumption UART, GPIO, PCM UART, GPIO, PCM Receive DM1 Max. 2.480 3.30 3.60 3.60 3.30 0 4 -70 -83 5:1 -0.30 0.80 VDD_PIO+0.3 0.70VDD_PIO 0 0.40 VDD_PIO-0.40 46 - Min. 2.402 3.00 3.00 -6 Typ. Units GHz V V dBm dBm V V V V mA Block Diagram Regulator VDD_MEM VDD_PIO RF_IN-OUT B.P.F Balun UART(4) Loop Filter RF + BB Xtal Flash Memory I/O USB(2) PCM(4) SPI(4) GPIO(8) RESET GND(6) Note: The above PRELIMINARY data are not guaranteed and are subject to change without notice. The Bluetooth(R) word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. 10 Jun./2003 Ver.1.1 TAIYO YUDEN Simple Cable Replacement Features *The module is a Max.4dBm( Class2 ) module. *Bluetooth(R) standard Ver1.1 conformity. *Internal baseband clock oscillator. *Internal 1.8V regulator *Low current consumption *Support functions Bluetooth(R) Module EYSF2CA**-** Outline 2.2 1x11 2.2 Unit: mm Serial Port Emulation (Point-To-Point) * Interface: UART * Protocol Stack/Profile (L2CAP,RFCOMM,SDP,GAP,SPP) *Small outline. 15.4 x 10 x 2.0 mm 15.4 Applications * POS,Barcode Reader,FA equipments General Electrical Specification PR EL IM IN AR Y Parameter Carrier Frequency Operating Voltage (VDD_MEM) Operating Voltage (VDD_PIO) RF Output Power RX Sensitivity Load Impedance Input Low Voltage Input High Voltage Output Low Voltage Output High Voltage Average Current Consumption Description measured in 50 ohm Min. 2.402 3.00 3.00 -6 Typ. 3.30 3.30 0 -83 TBD No abnormal Oscillation RESET, UART, GPIO RESET, UART, GPIO UART, GPIO UART, GPIO Receive DM1 Packet -0.30 0.70VDD_PIO VDD_PIO-0.40 Max. 2.480 3.60 3.60 4 -70 5:1 0.80 VDD_PIO+0.30 0.40 - Block Diagram Regulator VDD_MEM VDD_PIO RESET UART(4) UART LED, Baudrate, Role, Op Mode SDP RF_IN-OUT B.P.F Balun RFCOMM Loop Filter RF + BB Xtal Flash Memory I/O SPI(4) LED(2) Baud Rate(3) Role Operation Mode GND(6) L2CAP LMP Note:The above PRELIMINARY data are not guaranteed,and are subject to change without notice. The Bluetooth(R) word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO.,LTD. is under license. 2.0 10 Units GHz V V dBm dBm V V V V mA Nov./2003 Ver.2.0 TAIYO YUDEN Class2 USB Full Module Features Outline *The module is a Max.4dBm( Class2 ) module. *Bluetooth(R) standard Ver. 1.2 conformity. *Internal baseband clock oscillator. *Internal 1.8V regulator *Low current consumption *Support functions SCO links,ACL links,Piconet<7>,Hold,Sniff,Park, AFH, Faster connection *Interface:EYSF2CSXX: USB(for data and voice) *Protocol stack:Under HCI firmware *Small outline. 15.4 x 10 x 2.0 mm Bluetooth(R) Module EYSF2CSXX Unit: mm 2.2 1x11 2.2 Applications *Notebook PC *PDA 15.4 General Electrical Specification PR EL IM IN AR Y Parameter Carrier Frequency Operating Voltage (VDD_MEM) Operating Voltage (VDD_PIO) RF Output Power RX Sensitivity Load Impedance Input Low Voltage Input Low Voltage Input High Voltage Input High Voltage Output Low Voltage Output Low Voltage Output High Voltage Output High Voltage Average Current Consumption Description measured in 50 ohm Min. 2.402 3.10 3.10 -6 Typ. 3.30 3.30 0 -83 48 No abnormal Oscillation RESET, SIDBAND, GPIO D+, DRESET, SIDBAND, GPIO D+, DSIDBAND, GPIO D+, DSIDBAND, GPIO D+, DReceive DM1 -0.30 0.70VDD_PIO 2.00 VDD_PIO-0.40 2.80 Max. 2.480 3.45 3.45 4 -70 5:1 0.80 0.80 VDD_PIO+0.30 0.40 0.30 - Units GHz V V dBm dBm V V V V V V V V mA Block Diagram Regulator VDD _MEM VDD_PIO USB(2) SIDBAND(3) RF_IN-OUT B.P.F Balun Loop Filter RF + BB Xtal Flash Memory I/O UART(4) PCM(4) SPI(4) GPIO(5) RESET GND(6) Note: The above PRELIMINARY data are not guaranteed and are subject to change without notice. The Bluetooth(R) word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. 2.0 10 TAIYO YUDEN Features Outline * Antenna is provided on board *The module is Max.4 dBm( Class2 )module * Bluetooth(R) standard Ver. 1.2 conformity * Internal baseband clock oscillator * Low current consumption * Support functions ACL links, Piconet<7>, Hold, Sniff, Park, AFH, Faster connection * Interface: UART * HCI module * Outline: 34.0 x 15.6 x 3.7 mm Nov./2003 Ver.2.0 Bluetooth(R) Module Class 2 UART All In One(ANT+RF+BB) EYMF2CAMM 34 Unit: mm * PC & peripheral General Electrical Specification Parameter Carrier Frequency Operating Voltage(VDD_MEM) Operating Voltage(VDD_PIO) Operating Voltage(VDD_1.8) RF Output Power RX Sensitivity Load Impedance Operation temperature range Input Low Voltage Input Low Voltage Input Low Voltage Input High Voltage Input High Voltage Input High Voltage Output Low Voltage Output Low Voltage Output High Voltage Output High Voltage Average Current Consumption Description VDD_MEM = VDD_PIO VDD_MEM = VDD_PIO Measured in 50 ohm No abnormal Oscillation Min. 2.402 3.0 3.0 1.75 -6 0 -0.3 -0.3 -0.3 Typ. 3.3 3.3 1.8 0 -83 25 Max. Units 2.480 GHz 3.6 V 3.6 V 1.9 V 4 dBm -70 dBm 5:1 70 Degree C 0.8 V 0.8 V 0.8 V VDD +0.3 V VDD +0.3 V VDD +0.3 V 0.4 V 0.4 V V V mA VDD_1.8V VDD_MEM VDD_PIO USB(2) UART(4) I/O SPI(4) PIO(12) AIO(2) RESET GND(6) Note: The above PRELIMINARY data are not guaranteed and are subject to change without notice. The Bluetooth(R) word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. PR EL IM IN AR Y PIO, AIO, SPI UART_RX, UART_CTS RESET 0.7VDD_PIO PIO, AIO, SPI 0.7VDD_PIO UART_RX, UART_CTS 0.7VDD_PIO RESET PIO, AIO, SPI UART_TX, UART_RTS PIO, AIO, SPI VDD -0.4 UART_TX, UART_RTS VDD -0.4 Receive DM1(VDD_MEM,VDD_PIO) Receive DM1(VDD_1.8) 14 35 Block Diagram Antenna B.P.F Balun Loop Filter RF + BB Xtal Flash Memory 3.7 Applications 15.6 TAIYO YUDEN Simple Cable Replacement Features Outline * Antenna is provided on board *The module is Max.4 dBm( Class2 )module * Bluetooth(R) standard Ver.1.1 conformity * Internal baseband clock oscillator * Low current consumption * Support functions Serial Port Emulation (Point-To-Point) * Interface: UART * Protocol Stack/Profile (L2CAP,RFCOMM,SDP,GAP,SPP) * Outline: 34.0 x 15.6 x 3.7 mm Jun./2003 Ver.1.1 Bluetooth(R) Module EYMF2CA**-** 34 Unit: mm * POS,Barcode Reader,FA equipments General Electrical Specification Parameter Carrier Frequency Operating Voltage(VDD_MEM) Operating Voltage(VDD_PIO) Operating Voltage(VDD_1.8V) RF Output Power RX Sensitivity Load Impedance Operation temperature range Input Low Voltage Input Low Voltage Input Low Voltage Input High Voltage Input High Voltage Input High Voltage Output Low Voltage Output Low Voltage Output High Voltage Output High Voltage Average Current Consumption 1 Description Min. 2.402 3.0 3.0 1.7 -6 0 -0.3 -0.3 -0.3 Max. Units 2.480 GHz 3.3 3.6 V 3.3 3.6 V 1.8 1.9 V 0 4 dBm -83 -70 dBm 5:1 25 70 Degree C 0.8 V 0.8 V 0.8 V VDD +0.3 V VDD +0.3 V VDD +0.3 V 0.4 V 0.4 V V V TBD mA Typ. Block Diagram PR EL IM IN AR Y Measured in 50 ohm No abnormal Oscillation PIO, AIO, SPI UART_RX, UART_CTS RESET PIO, AIO, SPI UART_RX, UART_CTS RESET PIO, AIO, SPI UART_TX, UART_RTS PIO, AIO, SPI UART_TX, UART_RTS Receive DM1 Packet 0.7VDD_PIO 0.7VDD_PIO 0.7VDD_PIO VDD -0.4 VDD -0.4 VDD_1.8V VDD_MEM VDD_PIO UART LED, Baudrate, Role, Op Mode B.P.F Antenna Balun RESET UART(4) SPI(4) RF + BB I/O LED(2) Baud Rate(3) Role Operation Mode GND(6) RFCOMM SDP Loop Filter Xtal Flash Memory L2CAP LMP Note:The above PRELIMINARY data are not guaranteed,and are subject to change without notice. The Bluetooth(R) word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO.,LTD. is under license. 3.7 Applications 15.6 TAIYO YUDEN Class 2 USB All In One(ANT+RF+BB) Features Outline * Antenna is provided on board *The module is Max.4 dBm( Class2 )module * Bluetooth(R) standard Ver. 1.2 conformity * Internal baseband clock oscillator * Low current consumption * Support functions ACL links, Piconet<7>, Hold, Sniff, Park, AFH, Faster connection * Interface: USB * HCI module * Outline: 34.0 x 15.6 x 3.7 mm Nov./2003 Ver.2.0 Bluetooth(R) Module EYMF2CSMM 34 Unit: mm * PC & peripheral General Electrical Specification Parameter Carrier Frequency Operating Voltage(VDD_MEM) Operating Voltage(VDD_PIO) Operating Voltage(VDD_1.8V) RF Output Power RX Sensitivity Load Impedance Operation temperature range Input Low Voltage Input Low Voltage Input Low Voltage Input High Voltage Input High Voltage Input High Voltage Output Low Voltage Output Low Voltage Output High Voltage Output High Voltage Average Current Consumption Description Min. 2.402 3.1 3.1 1.7 -6 0 -0.3 -0.3 0.7VDD_PIO 2.0 0.7VDD_PIO VDD_PIO-0.4 2.8 Typ. 3.3 3.3 1.8 0 -83 25 Max. Units 2.480 GHz 3.45 V 3.45 V 1.9 V 4 dBm -70 dBm 5:1 70 Degree C 0.8 V 0.8 V 0.8 V VDD +0.3 V V VDD +0.3 V 0.4 V 0.3 V V V mA VDD_1.8V VDD_MEM VDD_PIO USB(2) UART(4) I/O SPI(4) PIO(12) AIO(2) RESET GND(6) Note: The above PRELIMINARY data are not guaranteed and are subject to change without notice. The Bluetooth(R) word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. Measured in 50 ohm No abnormal Oscillation PR EL IM IN AR Y PIO, AIO, SPI D+, DRESET PIO, AIO, SPI D+, DRESET PIO,AIO,SPI D+, DPIO, AIO, SPI D+, DReceive DM1(VDD_MEM,VDD_PIO) Receive DM1(VDD_1.8) 14 37 Block Diagram Antenna B.P.F Balun Loop Filter RF + BB Xtal Flash Memory 3.7 Applications 15.6 TAIYO YUDEN Features Outline Pin_1 Dec./2004 Ver.1.1 Bluetooth(R) Module Class 2 USB Full Module (Connector Type) EYTF3CSTT *The module is a Max.4dBm (Class2) module. *Bluetooth(R) standard Ver. 2.0+EDR conformity. *Internal baseband clock oscillator. *Support functions -Bluetooth ACL links, Piconet<7>, Scatternet<2.5>, Hold, Sniff, Park, AFH & Coexistence, Faster connection, EDR -Others Selective Suspend, Dual Boot *USB Interface *Protocol stack: Under HCI firmware. *Outline: 26 x 23 x 3 mm. *Complete Lead Free *RoHS Available Unit: mm 23 Pin_20 26 Applications *Notebook PC max 3 FPC/FFC Connector Description Min. 2.402 3.15 -6 -0.3 0.7 x VDD 2.0 0.8 x VDD 2.8 Typ. 3.3 0 -83 Max. 2.480 3.45 4 -70 5:1 0.8 0.8 VDD +0.3 0.4 0.3 Units GHz V dBm dBm V V V V V V V V mA General Electrical Specification PR EL IM IN AR Y Measured in 50 ohm No abnormal Oscillation /RESET, PIO D+,D/RESET, PIO D+, DPIO D+, DPIO D+, DReceive DM1 RF_IN/OUT RF Conn Balun Filter RF+BB X'tal Parameter Carrier Frequency Operating Voltage(VDD) RF Output Power RX Sensitivity Load Impedance Input Low Voltage Input Low Voltage Input High Voltage Input High Voltage Output Low Voltage Output Low Voltage Output High Voltage Output High Voltage Average Current Consumption 43 Block Diagram VDD<3.3V> USB Note: The above PRELIMINARY data are not guaranteed and are subject to change without notice. The Bluetooth(R) word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. TAIYO YUDEN Features *The module is a Max.4dBm( Class2 ) module. *Bluetooth(R) standard Ver. 2.0+EDR conformity. *Internal baseband clock oscillator. *Support functions -Bluetooth ACL links, Piconet<7>, Scatternet <2.5>, Hold, Sniff, Park, AFH & Coexistence, Faster connection , EDR -Others Selective Suspend, Dual Boot. *USB Interface *Protocol stack: Under HCI firmware. *Outline: 31x 15 x 3 mm. *Complete Lead Free *RoHS Available Dec./2004 Ver.1.2 Bluetooth(R) Module Class 2 Full Module (RF Connector Type) Outline EYSFCCSXX Unit: mm 15 31 max 3 Applications *Notebook PC Board to Board Connector Description USB Interface Measured in 50 ohm Min. 2.402 3.15 -6 -0.3 0.7 x VDD 2.0 0.8 x VDD 2.8 Typ. 3.3 0 -83 Max. 2.480 3.45 4 -70 5:1 0.8 0.8 VDD +0.3 0.4 0.3 Units GHz V dBm dBm V V V V V V V V mA General Electrical Specification PR EL IM IN AR Y No abnormal Oscillation /RESET, PIO D+,D/RESET, PIO D+, DPIO D+, DPIO D+, DReceive DM1 RF Conn Balun Filter RF+BB X'tal Flash ROM Parameter Carrier Frequency Operating Voltage (VDD) RF Output Power RX Sensitivity Load Impedance Input Low Voltage Input Low Voltage Input High Voltage Input High Voltage Output Low Voltage Output Low Voltage Output High Voltage Output High Voltage Average Current Consumption 43 Block Diagram VDD<3.3V> RF_IN/OUT N.C[8] USB Note: The above PRELIMINARY data are not guaranteed and are subject to change without notice. The Bluetooth(R) word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. TAIYO YUDEN Class 2 Full Module (Antenna Type) Features *The module is a Max.4dBm( Class2 ) module. *Bluetooth(R) standard Ver. 2.0+EDR conformity. *Internal baseband clock oscillator. *Support functions -Bluetooth ACL links, Piconet<7>, Scatternet <2.5>, Hold, Sniff, Park, AFH & Coexistence, Faster connection , EDR -Others Selective Suspend, Dual Boot. *USB Interface *Protocol stack: Under HCI firmware. *Outline: 31x 15 x 3 mm. *Complete Lead Free *RoHS Available Dec./2004 Ver.1.2 Bluetooth(R) Module EYSFDCSXX Unit: mm Outline 15 31 max 3 Applications *Notebook PC Board to Board Connector Description USB Interface Measured in 50 ohm Min. 2.402 3.15 -6 -0.3 0.7 x VDD 2.0 0.8 x VDD 2.8 Typ. 3.3 0 -83 Max. 2.480 3.45 4 -70 5:1 0.8 0.8 VDD +0.3 0.4 0.3 Units GHz V dBm dBm V V V V V V V V mA General Electrical Specification PR EL IM IN AR Y No abnormal Oscillation /RESET, PIO D+,D/RESET, PIO D+, DPIO D+, DPIO D+, DReceive DM1 Antenna Balun Filter RF+BB I/O X'tal Flash ROM Parameter Carrier Frequency Operating Voltage (VDD) RF Output Power RX Sensitivity Load Impedance Input Low Voltage Input Low Voltage Input High Voltage Input High Voltage Output Low Voltage Output Low Voltage Output High Voltage Output High Voltage Average Current Consumption 43 Block Diagram VDD<3.3V> N.C [8] USB Note: The above PRELIMINARY data are not guaranteed and are subject to change without notice. The Bluetooth(R) word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. Dec./2004 Ver.1.1 TAIYO YUDEN Features Bluetooth(R) Module HCI Module for Cellular Phone and PDA EYSNDYAXX Outline 7.5+/-0.2 * The module is a Max.4dBm ( Class2 ) module. * Low current consumption. * Bluetooth(R) standard Ver1.2 conformity * HCI module * Interface:UART * Supports multiple host reference clock inputs * Small outline * Outline : 7.5x7.5x1.25mm *Without Shieldcase *RoHS Conformity *Halogen Free (Substrate) Unit: mm 7.5+/-0.2 Applications Lot.No Y AR VDD_IN BALUN Tx / Rx GPIO RF BB GND *PDA *Cellular Phone *Mobile system General Electrical Specification Parameter Carrier Frequency Operating Voltage RF Output Power RX Sensitivity TX Peak Current Consumption RX Peak Current Consumption Deep Sleep Current Consumption Description 1.25 +/-0.1 Typ. Max. 2.480 3.6 4 Units GHz V dBm dBm mA mA uA deg-C Measured in 50 ohm Min. 2.402 2.7 -6 IN Continuous Transmit Mode Continuous Receive Mode Standby Mode -30 -83 31 48 83 85 General Operating Temperature condition Block Diagram EL IM VDD_IO PR HCI: UART (4) MODEM BPF CODEC (4) Ant IN / OUT Crystal Slow_Clock Note:The above PRELIMINARY data are not guaranteed, and are subject to change without notice. The Bluetooth trademarks are owned by their proprietor and used by TAIYO YUDEN CO., LTD under license. Aug./2004 Ver.1.0 TAIYO YUDEN Class2 Bluetooth(R) RF Module Features * The module is a Max.4dBm ( Class2 ) module. * Bluetooth(R) standard Ver1.1, 1.2 conformity. * Compatible with CDMA Interface. * Support the 19.2MHz host reference clock input. * Shield case type. * Small outline by LTCC substrate built-in RF function. * Outline : 5.0 x 4.0 x 1.35max mm Pin pitch 0.75mm (Min) * 16 pin LGA package. * Lead Free * RoHS Available Bluetooth(R) Module EWSCBBQXX Outline 4.0 Applications *Cellular Phone 1.35max Y General Electrical Specification Parameter Description Carrier Frequency Supply Voltage VDD Supply Voltage VDD_IO RF Output Power Measured in 50 ohm RX Sensitivity TX Peak Current Consumption Worst Case Transmit Mode RX Peak Current Consumption Worst Case Receive Mode General Operating Temperature condition 5.0 Unit: mm AR Min. 2.402 1.9 1.62 -6 -30 Typ. IN IM -86 37 38 25 Max. 2.480 3.6 2.92 4 -70 80 Units GHz V V dBm dBm mA mA deg-C Block Diagram PR EL TCXO_IN VDD_IO VDD RF_I/O VBB_OUT VCC_OUT BPF RADIO CDMA Interface Base Band Note: The above PRELIMINARY data are not guaranteed and are subject to change without notice. The Bluetooth(R) word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. |
Price & Availability of EYMF2CAXX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |